Double Glazed Window Repair
It is worth looking into the warranty that comes with double-glazed windows in the majority of cases. It generally covers any problems with the window hardware - hinges and locking mechanisms - in the first 10 years.
upvc window repairs that forms between the glass windows is usually caused by a crack in the seal and must be fixed quickly to prevent mould or damp developing in your property.
Condensation Between the Windows
If condensation develops between the windows in your home, it is an indication that the seal that holds the gas that is used to insulate between the panes has failed. This is a serious problem that should be addressed immediately particularly in winter, when humidity is at its highest. It could also lead to damage around the sills and sealant, or even mildew or mould.
Ideally double-glazed windows shouldn't have condensation between the panes. However, it is not unusual for extreme humidity or a cold snap to trigger this issue. Fortunately, this issue is repaired without replacing the entire window. A professional can drill tiny holes in the window and then spray a special cleaning solution inside. The water is then taken out of the window and an anti-fogger device may be installed to stop any further buildup of moisture in the future.
Condensation may also occur between windows due to air leakage, or other factors outside the window. In this scenario, it may take longer for the condensation in the window to build up, since the air must be sufficiently warm to vaporise the water molecules. In these instances it is recommended to replace the double glazed windows rather than repair the seals on the existing units.
Double-glazed glass windows are comprised of two or more pieces of tempered insulated glass, which are joined by a metal framework. The gap between the two windows is filled with an insulating gas like argon or Krypton and then sealed. The seal stops the insulating gases from leaving and also prevents moisture and air from entering the gap.
As windows age, seals can be damaged, allowing moisture to enter between the glass panes. When the seals leak it is crucial to be aware of this since it signifies that the double glazing no longer performs as well as before. This could result in an increase in energy efficiency, higher heating bills, damage to property and the risk of condensation forming between the windows.
Mist
It is normal to see condensation appear on your windows. This indicates that your double glazing system is working well and is able to keep the heat inside your home. The condensation forms because the outside air is warmer than the glass, and reaches its dew point before the window does. Double glazing of top quality is an excellent method to accomplish this.
If the condensation is located on the inside of your window then this could be an indication of a problem with the ventilation in your home. This is because the extra moisture isn't going anywhere and ends up on your windows or in carpets, furniture and in other places around your home. This can be prevented by having it checked out by a professional and ensuring that there is plenty of fresh air inside your home.
Another reason why you may see mist in your double-glazed window is that the seal between the two panes has broken down. This could be due to wear and tear, or through the use of chemical cleaning solutions. The best thing to do is fix the windows as soon as you can.
The professional repair of your windows will ensure that they remain watertight and free from condensation, fogging and misting. This is also much cheaper than replacing your windows and you'll save money on your energy bill.
A registered window installer with FENSA will provide you with a cost estimate to repair or replace your double glazed windows. Upgrade your windows to energy efficient ones that are A-rated in the event that they are extremely old.
It is a good idea to retain copies of any warranties and agreements with the window installers. It can be helpful in the event that you have any future problems with your windows. Contact your window fitters to resolve the issue. This is a far better option than simply not addressing the issue that only make the problem worse and may lead to other issues in your home.
Close or open without difficulty
It's not just annoying when double-glazed windows are hard to open or close. They could also result in higher energy bills because of the loss of heat and draughts. It can also pose a security risk, especially when the locks aren't working properly. It is recommended to fix double-glazed doors and windows as soon as you can.
If you're unable to open your windows and have tried the simplest of fixes such as using a screwdriver in order to break it open, or tapping the frame with a hard object, then the issue could be more serious. It could be that the window is sagging within its frame and requires to be set again or there is an opening between the glass panes and the frames. In either case, you should contact an experienced double glazing repair expert to ensure that the proper repairs are made to prevent future problems.
It isn't uncommon for UPVC window handles and lock mechanisms to get stuck or hard to operate particularly when they're worn out and worn. This is caused by an accumulation of dirt or grease inside the handle. It can be solved by cleaning it with a uPVC cleaner. If this doesn't work then you could try gently tapping the uPVC frame using a hard object, such as an screwdriver, but be careful not to scratch the handle or the mechanism for window handles.
If this doesn't resolve the problem then the window will have to be replaced as the hinges might not be in the proper position or the locking mechanism could be damaged. In this instance, you must consult a specialist UPVC window repair expert.
David The Window Wizard is a specialist in double-glazed door and window repairs, including repairing double-glazed windows that have been blocked or locked. He has a wealth of experience the conversion of old window mechanisms into modern ones. He often can save you the expense of replacing the entire window. Call or email us now for more information or a free estimate.
Warping
Double-glazed windows are an excellent way to save energy in your home. They consist of two separate panes that contain a spacer or dense gas in between them. This creates a seal which keeps cold air out and warm inside. However, over time, windows can be damaged or broken and require repair. Most of these repairs can be done without replacing the entire window.
Warping is a common problem when double-glazed windows are installed. This occurs when windows begin to flex, twist or bow. This can impact the structural integrity and insulation properties of the windows. The best way to avoid this issue is to make sure that your double-glazed windows are installed correctly and maintained regularly.
Get in touch with a professional when you notice that your double-glazed windows are warping. This will help prevent the situation from getting worse. They can inspect your windows and determine the cause of the warping. They will then use special tools to fix the issue and make sure that your windows are sealed again.
A common cause of this issue is the presence of water vapour in the windows which can accumulate over time. It can be caused by a variety of factors, including the weather as well as humidity levels and temperature fluctuations. To address this issue, the specialist will drill out a small hole to let the moisture out. Then, they will use a cleaning agent to clean the glass and then apply an adhesive to protect it from moisture in the future.
If your windows aren't able to be closed or opened, it could be due to a malfunctioning mechanism or hinges. It is worth trying to lubricate the parts of the window before calling in a professional, as this can often solve the issue and decrease the need for replacements. However, if your windows are quite old or are not providing the insulation you'd like to have it is usually better to replace them.